How to use hot stamping ink?

Bronzing ink is a water-based ink, of course, there are also hot bronzing plastisol, today we introduce the use of hot bronzing ink.
First prepare a 100-120 mesh screen, a 65-degree scraper, and thermal transfer foil. The first is to use hot bronzing ink, repeat scraping two to three times, scraping two to three knives each time, and drying after scraping each time .
Then put the prepared hot stamping paper on the printed pattern, use hot stamping and stamping at 145°C for 10-15 seconds, and finally tear off the hot stamping paper to see the final effect.

Leave a Reply

Your email address will not be published. Required fields are marked *